What Battery Management System (BMS) Means?

Battery management systems offer powerful tools to “see inside” battery banks and improve lifespan, reliability, safety and performance.

A battery management system uses a specialized computer and sensors for batteries to be “smart” – and supply real-time information about their performance, along side data collection.

How It Works

In short, a BMS analyses real-time measurements from the chemical battery, then adjusts charging/discharging parameters and communicates this information to end-users. These sensors can monitor battery voltage, state of charge (SOC), state of health (SOH), temperature and other critical measurements. they will even display charging time on an easy-to-read “fuel gauge.”

Battery Voltage Levels

Applications of BMS

Battery management systems offer numerous benefits various battery chemistries (as explained below).

For these reasons, a BMS is employed frequently in off-grid applications and battery backup applications, including generators and power utilities, telecom, hospitals, data centers and more.

But for lithium-ion batteries, a BMS doesn’t just offer benefits; it’s an absolute safety requirement to scale back the likelihood of fires and explosions. That’s because li-ion has the very best power density, and overcharging lower-capacity cells can cause thermal runaway and combustion.

Thus, in li-ion batteries, BMS ensures battery cells operate within their ideal operations window (including temperature, current, voltage, maximum charge and discharge current limits, etc.). A BMS can even help ensure cells are balanced properly.

BMS for Lithium Battery

Main Advantages of BMS

Without BMS, battery operators often depend solely on routine maintenance to spot upcoming battery problems and determine when to rehab or replace batteries.

Battery monitoring systems supplement these efforts by capturing vital operating parameters, cell/unit voltage and current; resistance; cell/unit/ambient temperature; electrolyte levels; and more.

This data is automatically recorded and may be used for predictive maintenance and more accurate runtime estimates.

Improved Safety
Battery monitoring systems offer several safety benefits, including:

* Remote monitoring and alarms

* Reducing maintenance – which minimizes users’ contact with high voltage

* Early warning for system failure, including dangerous conditions

* Battery disconnection just in case of failure or unsafe operating conditions

Easy Access To Key Information

The state of charge (SOC) indicator functions as a kind of “fuel gauge” that displays the usable amount of energy – almost like battery estimates in cellphones and laptops. This helps determine optimal charging and discharging.

And data logging capabilities allow systems to gather trending data and make reports. These tools leave estimations, long-term tracking and improved battery use. And remote access and software alarms can reduce maintenance and transit time and costs. This makes BMS ideal for commercial settings and vacation homes, where maintenance crews or owners might not always be onsite.

Reduced Maintenance and Replacement Costs

Even “maintenance-free” batteries require periodic inspection for optimal performance. And standalone battery management systems can supplement on-site inspections or owners’ maintenance efforts.

BMS not only optimizes charging/discharging and other variables; it also helps identify maintenance requirements and predict battery failure.

And BMS can improve lifespan, reducing the frequency and likelihood of battery replacement.

A feature referred to as Low-Voltage Shutoff can reduce maintenance and maximize lifespan, especially in remote applications where routine inspection is tougher.

Finally, cell voltage monitoring ensures that charge and discharge won’t exceed manufacturer’s recommendations.

Protection Against Extreme Temperatures (Extended Lifespan)

For every 15°F to 20°F below 80°F, batteries lose ~10% capacity – while PV production decreases and electrical demand increases. Conversely, every prolonged 15°F above 77°F halves battery lifespan.

A BMS uses sensors to watch ambient and battery temperature, allowing early warning when battery temperatures are outside optimal ranges. this will prolong lifespan and improve capacity.

These features are especially important in lithium-ion batteries, where temperature readings can influence whether A battery should be charged or discharged (to avoid thermal runaway).

Cell Balancing For Equal voltage

Ideal voltage depends on battery chemistry. But altogether cases, using batteries outside this voltage range can slash cell life.

In addition, each cell has slightly different voltage window where charging/discharging should occur, for long life and proper operation. Cold cells must be charged to a better voltage. And weak cells can prevent other cells from charging completely.

Some BMS systems can ensure equally charging among cells by measuring current and charge rate–and performing either passive or active cell balancing.

In addition, BMS allows for advanced, temperature-compensating (“smart”) charging, including float (fixed voltage over time), pulsed high current and more.

Knowledge is power. A battery management system can optimize battery reliability, safety, maintenance, performance and lifespan. So it’s going to be worth considering whether A battery management system could help save time, headaches and money. For more information, including key requirements and battery compatibility guidelines, contact your systems installer or battery manufacturer/supplier.

Please Share

Author

info@blog.greeniconsystems.com.ng

Leave a Reply

Your email address will not be published. Required fields are marked *